Contact Us

Foshan Kezun Stage Lighting Equipment Co., Ltd.

Tel:  +86 757-85623159

Fax: +86 757-85623160

Add: China (Mainland) Guangdong Foshan No. 26, Caochang Hainanzhou Industrial Zone, Lishui Town, Nanhai Dist.China



Tech Support 24 Hour Hot line:+86 4008-377-008
Home > News > Content
Cooling Fan Installation Skills Oct 14, 2017

Cooling fan will be different due to the installation method, which led to heat dissipation is very different, today the source of wind Xiaobian and we share the theme is: "cooling fan installation skills" details are as follows ...

Generally the correct installation of the cooling fan is conducive to the product's thermal performance, including the installation direction, direction, location, distance from the heat dissipation products and so on.

    1. When setting the cooling fan side, try to keep away from the cooled body. (When the cooling body is flat, the area is approximately the same as the fan, and 250px is the standard.

    2. The cooling fan mounting hole should be larger than the fan diameter, fan mounting hole diameter> fan diameter.

    3. When installing the fan, there should be no gap between the cooling fan and the panel. (Leaving the gap in the case, will not give full play to the cooling effect)

    4. The abrupt change in wind direction and flow cross section will weaken the cooling effect, so please avoid this situation.

    5. Install with unilateral flange surface (unilateral flange mounting).

    6. Install with the bolts (both sides of the flange installation), both sides of the flange installation, please fix the case, so that it does not change. The tightening torque should be around 0.44N · m.

7. Box-type fan installation For the box fan, align the screw hole, insert the panel opening, and fix it with the supplied mounting screws and nuts. · The lid can be installed up and down, please install according to actual needs.

Xiaobian want to install the cooling fan you have to get it! Today's share is here.