Contact Us

Foshan Kezun Stage Lighting Equipment Co., Ltd.

Tel:  +86 757-85623159

Fax: +86 757-85623160

Add: China (Mainland) Guangdong Foshan No. 26, Caochang Hainanzhou Industrial Zone, Lishui Town, Nanhai Dist.China

Web: www.kz-lighting.com

Email: kezun05@kzlight.com

Tech Support 24 Hour Hot line:+86 4008-377-008
Home > Exhibition > Content
KEZUN STAGE LIGHT FACTORY 5 minutes to let you know the characteristics of stage lighting equipment May 05, 2018

FOSHAN KEZUN STAHGE LIGHT FACTORY A wide range of products, including Moving Head Beam Lights, Professional LED Lights, Laser Lights, Follow Spot Lights, Scan Lights, Strobe Lights, Outdoor Lights, Stage Lighting, Stage Effects, Computer Consoles and Stages Lamps and other products. The products are not only more and more sophisticated, cost-effective, and technically superior.


The following Guangzhou stage lighting manufacturer Cosda introduces you to the commonly used lamps and their characteristics in the stage design:

1. Spotlight: It is one of the most widely used lamp types for stage lighting. Currently, it has 1KW, 2KW, and 2KW is the most widely used. It irradiates the light, the edge of the light spot contour is relatively clear, can highlight a part, but also can enlarge the light spot to illuminate an area, as the main light source of the stage, often used for surface light, ear light, side light and other light positions.

2. Soft light: The light is soft and symmetry, not only can highlight a certain part, but also has no stiff spot, so it is convenient for several lamps to converge. Commonly there are 0.3KW, 1KW, 2KW and so on. Mostly used for column light, flowing light, etc.

3. Back light: It is a reflective type of light, its characteristics are hard light, high illumination and long range, is a kind of economical and efficient light, common 0.5KW, 1KW, 2KW, etc., used at most 2KW.

4. Astigmatism light: light diffuse, uniform, large projected area, divided into the days of astigmatism and ground row astigmatism, common 0.5KW, 1KW, 1.25KW, 2KW, etc., mostly used for sky screen irradiation, can also be used for the chairman of the theater The general lighting of the station.

5. Modeling light: The principle is between the spotlight and the spotlight. It is a kind of special lamp, which is mainly used for modeling of people and scenery.

6. Footlights (also known as bar lights): soft light, a wide area. Mainly used as medium and netscape lighting, cloth color, but also auxiliary light lighting at the location of the platform.

7. Projection slides (also known as projection slides) and canopy effect lights: can form an overall picture on the stage canopy, and a variety of special effects, such as: wind, rain, thunder, electricity, water, fire, smoke, clouds and so on.

8. Scanner: This is a kind of intelligent lamp controlled by DMX512 or RS232 or PMX signal. Its light color, spot and illumination are better than the above conventional lamps. It is a kind of intelligent lamp developed in recent years. It is often installed in surface lighting. Top lighting, stage backstage and other positions, the operation of the color, shape, map, etc. can be programmed to run. Due to the different power levels, there is a difference in use on the stage. General low-power computer lights, only suitable for ballroom use. On the stage, small-powered computer light lines and spots are often turned off by stage spotlights, back lights, etc. Therefore, special attention should be paid to the selection.

9. Follow light: It is a lighting fixture of the stage lighting. It is characterized by high brightness and imaging with a lens. It can show a clear light spot. By adjusting the focal length, the light spot can be changed. There is an activity fence, which can easily change the color, and the lamp body can run freely. Now there are many varieties in the market, and the labeling methods are not the same. For example, 1KW halogen tungsten light source, 1KW xenon light source, 1KW metal halide light source, 2KW metal halide light source, etc. Lights (light intensity, illuminance at a specific distance), such as 8-10m follow light, 15-30m follow light, 30-50m follow light, 50-80m follow light, and are functionally differentiated as: Mechanical chasing light, its focusing, light bar, color change are manually completed; the other is a computer chasing light, its focus, light bar, change color, adjust the color temperature are automatically completed by sliding electric appliances, so in When selecting, it must be carefully selected for various indicators.